Enviro Bistro 3500 Owner's And Operator's Manual

9, SIDE BURNER AND GAS LINE HOOK AND TESTING 1 Once the side burner has been installed onto the cart and engine assembly the gas line can be connected. 2 It may be necessary to remove the front gusset after the side burner has been installed in order to get access to the gas lin…

12, INSTALLING PROPANE CYLINDER IN CABINET To install the propane cylinder open the doors to the cabinet and place the propane cylinder inside the cabinet and drop in the hole provided in the bottom shelf of the cabinet. Secure the tank to the cabinet using the attached propane…

6, ASSEMBLY INSTRUCTIONS Your ENVIROGRILL BISTRO will require some assembly. Please do not use a drill to modify any component, as this would not be necessary. Inspect all components for damage before assembly begins. If damage is present please contact your local dealer or courier compan…

17, METHODS OF COOKING Your ENVIROGRILL BISTRO gas grill is designed for a multiple of cooking methods. 1 The MAIN BURNERS allows for traditional barbecuing. These burners can achieve low to high temperatures for searing and finishing steaks, hamburgers, pork chops and grilling chicken parts,…

16, Enviro Bistro 3500 INSTALLATION REQUIREMENTS AND DIMENSIONS The ENVIROGRILL BISTRO WIDTH: 52.287 inches (132.8 cm) DEPTH: 23.774 inches (60.38 cm) HEIGHT TO SIDE SHELF 32.004 inches (81.28 cm) HEIGHT: 46.090 inches (117.0 cm) AS SHOWN BELOW: …

20, TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION IGNITER DOES NOT SPARK Electrode fouled Electrode improperly gapped Electrode cracked Lead wire is disconnected Lead wire is cracked No spark Wipe the electrode with a soft clean cloth The electrode sh…