Environmental Technology SST–2 Installation And Operation Manual

4, Model SST–2 11/07 22804(800) 234-4239http://www.networketi.com 4 of 12 Environmental Technology, Inc. Front Panel Interface Status indicator SUPPLY (green) power applied SUPPLY (green, fl ashing) bad thermistor HEAT (yellow) call for heat GFEP (red) ground fault condition GFEP (red, fl ashi…

10, Model SST–2 11/07 22804(800) 234-4239http://www.networketi.com 10 of 12 Environmental Technology, Inc. Appendix B. SST–2 Wiring Diagram. CONNECT BLACK SENSOR WIRE TO ONE BLUE WIRE IN SST2 ENCLOSURE, AND CONNECT RED SENSOR WIRE TO THE OTHER BLUE WIRE. (PRE-WIRED IN AMBIENT SST2-AMB …

2, Model SST–2 11/07 22804(800) 234-4239http://www.networketi.com 2 of 12 Environmental Technology, Inc. …

3, Model SST–2 22804 11/07 (800) 234-4239 http://www.networketi.com 3 of 12Environmental Technology, Inc. Safety Make all electrical connections in compliance with the National Electric Code (NFPA 70) and local electrical code. If you have questions concerning the installation or application,…

6, Environmental Technology SST–2 CONNECT BLACK SENSOR WIRE TO ONE BLUE WIRE IN SST2 ENCLOSURE, AND CONNECT RED SENSOR WIRE TO THE OTHER BLUE WIRE. (PRE-WIRED IN AMBIENT SST2-AMB MODEL) CONNECT LINE 2 (OR NEUTRAL) FROM INCOMING POWER TO BOTH LINE 2 RED AND NEUTRAL/WHITE INSIDE SST2 ENCLOSURE. THIS CONNECTION PROVIDES …

11, Model SST–2 22804 11/07 (800) 234-4239 http://www.networketi.com 11 of 12Environmental Technology, Inc. Appendix C. SST–2 Wiring. CONNECT BLACK SENSOR WIRE TO ONE BLUE WIRE IN SST2 ENCLOSURE, AND CONNECT RED SENSOR WIRE TO THE OTHER BLUE WIRE FOR REMOTE ALARM ONLY IN AMBIENT SENSING SST2-AMB M…