EOC NYX-14 Operation And Maintenance Manual

25, EOC NYX-14 25 CAUTION: Bright sources such as relight, headlights, searchlights, etc. can damage the NYX-14. Avoid exposing the unit to these types of light sources. 7. Adjust the image brightness using the gain control knob (NYX-14M version) to achieve the best pos- sible image …

10, 10 1.4 LIST OF ABBREVIATIONS C Celsius (Centigrade) CCW counterclockwise Cont’d Continued CW clockwise Dia diameter F Fahrenheit FOV FieldofView g gram Gen Generation H Height hr hour IR infrared …

38, 38 5. Clean both ends of the new intensier tube with cotton-tipped applicators dampened with isopropyl alcohol. 6. Slide the intensier tube, contact-end rst, into the opening of the wired housing. The groove on the side of the tube should engage the ridge inside the opening of the w…

31, 31 B. Emission points Emission points are steady or uctuating pinpoints of bright light in the image area that do not go away when all external light is blocked from the objective lens (Figure 4-3). The position of an emission point withintheimageareadoesnot…

14, 14 ITEM DATA Exit Pupil Diameter 14 mm Eyepiece Focal Length 27 mm Eye Relief 25 mm Eyepiece Diopter Adjustment -6 to +2 diopters Built-in IR Illuminator — Power — Illumination Range — Focus Distance — Illumination Wavelength 50 mW 20 m 3 m 850 nm * Optional. TABLE 25. EN…

22, 22 B C FIGURE 37. MOUNTING A CAMERA/ CAMCORDER TO THE NYX14 A 3.1.8 UNIVERSAL CAMERA ADAPTER APPLICATION To mount the NYX-14 (axed with a camera or video recorder) to a tripod, you will need a universal camera adapter. Mount the connected devices to a tripod as follows: 1. Screw …