Mea Junior Operation & User’s Manual

13, Page 13www.mea.com.au Junior Weather Station User Manual Sites chosen should not be: ● Subject to ooding or inundation by storm surge. ● Aected by a high water table. ● Prone to subsidence. ● Unduly susceptible to lightning strike. ● Vulnerable to bushre. …

7, Page 7www.mea.com.au Junior Weather Station User Manual Contents of the Shipping Crate Your Junior Weather Station has been shipped to you in a large plywood box so that the weather station is well protected in transit. The combined weight of the weather station and the shipping crat…

21, Page 21www.mea.com.au Junior Weather Station User Manual Install the Rain Gauge The rain gauge is a tipping-bucket gauge with a resolution of 0.2 mm per tip. This gauge should be located in a cleared area approximately 4 ~ 8 m from the weather station to minimise any eect the system …

53, Page 53www.mea.com.au Junior Weather Station User Manual Changing the Threshold Temperature for Frost Hours 1. From the File menu select Edit Scheme. 2. When the scheme editor opens, go to Conguration ⇒ Instruments. 3. In Instruments List pane, left-click on the Frost instrument to …

14, Mea Junior Page 14www.mea.com.au Junior Weather Station User Manual Hardware Installation Required Tools and Equipment To install the weather station and rain gauge you will need: ● A galvanised steel post with an outside diameter of 40~50 mm, 1.5 m long. ● Rapid-set concrete if the post …

37, Page 37www.mea.com.au Junior Weather Station User Manual Logger Information Scheme Name Check that this is the correct scheme before unloading. Logger State Can be ‘Primed’, ‘Logging’ or ‘Stopped’. Data will only be recorded when the data logger is in a ‘Logging’ state. Sca…