ALLEN & HEATH GR2 Operation & User’s Manual

23, GR2 User Guide 23 AUDIO ZONE MIXER GR2 ALLEN&HEATH prioritymute mic 3mic 2mic 1 mic 6mic 5mic 4 music 4mics zone 1 zone 2alarmmusic 3music 2music 1 mute >mono < source ><source 21 21 mic mic music 212121 ALLEN&HEATH GR2 OPERATOR SHEET CONTACT SETTINGS 5 4 3 2 …

12, 12 GR2 User Guide Front Panel – Configuration Settings To access the configuration settings remove the 3x M3 hex screws securing the front cover plate. Use the 2mm Allen key provided. DIP switch settings Up = ON. Factory default =all switche…

6, 6 GR2 User Guide Features 6 (4) mic / line inputs Mic 1 balanced Phoenix terminal plug and XLR, 2-6 Phoenix Selectable +15V phantom power (mic 1,2,34,56) Gain trims and pad switches protected behind front cover p…

10, 10 GR2 User Guide Front Panel – Operator Controls 1. Rack ears These are supplied fitted ready for 19” rack or furniture mounting. For desk top operation they may be removed using a T10 Torx screwdriver. 2. Feet These are supplied fitted ready …

13, ALLEN & HEATH GR2 GR2 User Guide 13 Channel trim settings Use a small flat bladed screwdriver to set or adjust. Pad Switches in a 30dB attenuator pad for the mic input. Use with hot mic or line level sources. Gain Adjust from +10 to +60dB gain (-20…

8, 8 GR2 User Guide Audio Signal Paths Simplified block diagram Page mix - Overrides the music/mic selection. The input is from the external page input and/or from mic 1 if it is configured as a paging mic. The page mix EQ provi…