Digi-Tron ULD Operation Manual

14, 4.6.2 Clock It is possible to activate or deactivate the clock from the Miscellaneous Menu. When activated, it is possible to alternate between Weight Mode (or Counter Mode) and the clock by pressing the L and I buttons in sequence. If deactivated, it is not possible to access…

9, The weight or the quantity is coded in ASC II with decimal point. The carriage return character is 0x0D (hexadecimal). The sending of the stream is interrupted in the case that there is no significance. The excess weight bit is set when there is excess weight (superior trace) or un…

6, Note 1: The more weight samples you use, the fewer the counting errors, and the closer the sample’s unit weight will be to the average weight calculated by the scale. Note 2: To be more efficient in counting, it is essential that the scale be level and away from any outside i…

18, 5.9 Blinking Display - If the display is blinking after a command on the keypad (tare or printing), there is a pending command waiting for the platform’s stability or the minimum weight set the tare or to print. - If the display is blinking after starting up the scale and keep…

4, Before starting a simple weighing, verify these items: -The platform is empty -There are no obstructions to the weighing platform -The zero and kg indicators are lit With these items in order, you may place the product to be weighed on the scale. Avoid impacting the platform. Whe…

13, Digi-Tron ULD 4.6 Miscellaneous 4.6.1 Keypad tone An audio tone confirmation is emitted every time a button in pressed. It is possible to activate or deactivate on the Miscellaneous Menu. Press the Z button to select the SINAL DE TECLA (Keypad Tone) menu. From item 7 on the Options Menu…