Lexmark X950 Series Operation & User’s Manual

82, • Load envelopes with the flap side up and to the right. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may severely damage the printer. Notes: • Do not exceed the maximum stack heigh…

219, Menu item Description Print Area Normal Whole Page Sets the logical and physical printable area Notes: • Normal is the factory default setting. When attempting to print data in the non-printable area defined by the Normal setting, the printer clips the image at the boundary. • Whole Page all…

202, Menu item Description Ringer Volume On Off Controls the fax speaker ringer volume Note: On is the factory default setting. Answer On Menu item Description All Rings Single Ring Only Double Ring Only Triple Ring Only Single or Double Rings Only Single or Triple Rings Only Double or Triple…

80, Lexmark X950 Series 2 For paper or specialty media that is longer than letter-size paper, gently pull the extension until it is fully extended. 3 Flex the sheets of paper or specialty media back and forth to loosen them. Do not fold or crease them. Straighten the edges on a level surface. Paper Envelopes Loading p…

290, 38 Memory full Try one or more of the following: • Touch Cancel job to clear the message. • Install additional printer memory. 39 Complex page, some data may not have printed Try one or more of the following: • Touch Continue to clear the message and continue printing. • C…

238, Maintaining the printer Periodically, certain tasks are required to maintain optimum print quality. Cleaning the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet. CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exteri…