Digimerge DH200+R Series Instruction Manual

58, 46 Using the Main Menu 4. VOLTAGE WARNING: There was a surge in electrical output. 5. LOW RTC BATTERY WARNING: The system’s internal clock battery is low. 6. EXTERNAL DEVICE EVENT: A USB device has been removed. 7. NETWORK LINK DISCONNECT: The ethernet cable was unplugged. To use a custom…

164, 152 Appendix J: Remote Viewing using Internet Explorer APPENDIX J: REMOTE VIEWING USING INTERNET EXPLORER Along with the CMS-DH remote client software, you can also view your system remotely using Internet Explorer (version 7 or later recommended). Remote viewing through Interne…

170, 158 Troubleshooting Remote Connectivity Trouble Shooting Error Possible Causes Solutions • I cannot connect to the system using a DDNS URL • No internet connection • A DDNS account was not created • Incorrect DDNS URL • DDNS not enabled on the system • Ensure the DVR is connecte…

75, 63 CMS-DH Central Management Software 6. Click the Offline button to connect to the DVR. Double-click the DVR icon to begin viewing. 1. Click the Offline button 2. Double-click DVR icon Final Result Once you have added the DVR, you can add multiple DVRs and view them in the tab. To switch DV…

96, 84 CMS-DH Central Management Software Zooming into the E-Map • To zoom into the E-Map, click the Zoom In / Zoom Out buttons ( ). Removing camera icon in the E-Map • Select the camera icon in the e-map, and click the Remove Item button ( ). Adding Multiple E-Maps To add multiple E-Maps: • Right…

152, Digimerge DH200+R Series 140 Appendix D: Setting Up DDNS Service APPENDIX D: SETTING UP DDNS SERVICE Digimerge offers a free DDNS service for use with your DVR. A DDNS account allows you to set up a web site address that points back to your local network. The following outlines how to set up your free DDNS a…