MegaLite Disco DMX-512 Operation & User’s Manual

1, USER MANUAL Table of Contents Safety Information……………………………………………………………………………………………. 3 Specifications……………………………………………………………………………………………�…

6, Operation 2. After software has been installed connect via USB cable (included in package). to the front of the Enlighten Splitter. Turn the Enlighten Splitter power on. The Red LED’s on channel 1 through 4 indicate there is power present. When the Green LED are flashing t…

7, MegaLite Disco DMX-512 Cleaning and maintenance Installation Maintenance: The operator has to make sure that the unit is operating safely and has the installations and electron- ics checked by an expert every 2 years. The following points have to be considered during the inspection: 1) All screws u…

5, 5 Main Power Connection Caution! 1. Do not connect fixture to a dimmer system. 2. This unit must be earthed. (electronically grounded) 3. Replace fuse only with the specified type and rating. The occupation of the connection-cable is as follows: 110V Connection Cable (…

4, 4 Specifications Part Numbers Fixture MC1010– Disco Splitter Mechanical Specifications Fixture Packaged for Shipping Size: 19” x 1.75” x 6” Weight: 6 lb Size: 20” x 7.5” x 3” Weight: 7 lbs Disco USB interface inside Input DMX Connec…

3, Check that the unit has not been damaged during transport Protection Against Fire 1. Maintain a minimum of 2 foot distance from any type of flame. 3. Replace fuse only with the specified type and rating. 4. Do Not install the unit to close to a heat source. 5. Make sure …