Mellanox Technologies Grid Director 4036 Installation Manual

48, Hardware Installation 48 6.7 Field Replaceable Units 6.7.1 Fan Unit The 4036/2036 switch has a hot swappable Fan Unit with three fans that are used to maintain proper cooling, as shown. In normal operation, the two fans work at 50% utilizatio…

18, Getting Started 18 Table 2: Rear Panel Components Component No. Function InfiniBand Port Connector 36 4X QSFP InfiniBand connectors for passive copper cables, active copper cables, active optical cables, and connect optical cables. InfiniBand …

37, Mellanox Technologies Grid Director 4036 Grid Director 4036/2036 Installation Manual 37 5. Ensure that the clip nuts are already installed in the rack holes of the correct U level (on all four vertical rack rails) as described in Measuring the Distance between Mounting Rails (on page 33).…

15, Grid Director 4036/2036 Installation Manual 15 Figure 6: Packing the 4036/2036 Switch 6. Insert the switch into the cardboard box and place it on the bottom foam. 7. Place the top foam on top of the switch. 8. Slide the rail kit box in the dedicat…

30, Technical Specifications and Certifications 30 5.11 Export Information CTP (Composite Theoretical Performance) is a calculation measured in MTOPS (millions of theoretical operations per second). The 460EX/460GT contain a 440H6 core (not a 460 core; it …

54, Cabling 54 This kit contains the Mng cable and the following adaptors: RJ45 to RJ45 cable A RJ45 to DB-9 cross-adaptor for RS-232 console connection (CLI). (The DB-9 adaptor has a number 26 printed on it. This means that pins 2 and 6 are crossed)…