Mellanox Technologies IS5025D-1BRC Operation & User’s Manual

43, QDR InfiniBand Switch Platform User Manual Rev 2.9 Mellanox Technologies 43 Use the MTUSB-1 adapter (available from Mellanox) to reprogram the switch firmware using a server or PC running MFT. Figure 28: MTUSB-1 with Cables The MTUSB adapter comes with three cables, but has only t…

26, Basic Operation and Installation Rev 2.9 Mellanox Technologies 26 11. Do Not Use The Switch As A Shelf Or Work Space. 3.6.2 Mechanical Installation The procedure for installing the switch in a full rack while bringing the power cord across along side of the switch can be found i…

59, Mellanox Technologies IS5025D-1BRC QDR InfiniBand Switch Platform User Manual Rev 2.9 Mellanox Technologies 59 Figure 32: Which Side of the Rack Do You Want the Connectors?  Do you want the connector side recessed in the rack to allow for larger cable bending radius?  Will the connector side be recessed past other equip…

31, QDR InfiniBand Switch Platform User Manual Rev 2.9 Mellanox Technologies 31 Figure 17: Screwing on the Rail 5. Clip the 4 caged nuts into the holes in the rack you will be using to connect the rail slides. Check that both sides of the switch, left and right, are the same level in th…

39, QDR InfiniBand Switch Platform User Manual Rev 2.9 Mellanox Technologies 39 • Flash memory The manager also has the ability to burn new firmware on the switch. 4.2.1 Subnet Management The Subnet management features include: • upgrading drivers • upgrading software • monitoring of:  AC…

8, Rev 2.9 Mellanox Technologies 8 Revision History Table 1 - Revision History Table Date Revision Description June 2011 Rev 2.9 Removed references to paper clip. Changes to reset button section Added warning do not use the switch as a shelf. June 2011 Rev 2.8 Changed three minute boot up time to 5 …