Navico mx420 Operator's Manual

68, Version 2.0 55 Waypoint Operator’s Manual 6. Press the Lock all WPT softkey. 7. Press the E key. To Unlock all Waypoints 1. Select the WPT key until the WPT1 screen is displayed. 2. Move the cursor to the desired waypoint. 3. Press the E key. 4. Press the More softkey. 5. Press the More so…

158, Version 2.0 145 Automatic Identification System Operator’s Manual Use the softkey to select Yes or No. Yes means that the selected unit is connected to the MX420. ECDIS, PILOT, Long Range, Ext. GPS Port: Use the softkey to select the serial port to which the device is con- nected. “AIS P…

206, Version 2.0 193 Demonstration Mode Operator’s Manual Appendix F - Demonstration Mode This enables the CDU to function as though you are under way, even though you are completely stationary. The default setting is No. When set to Yes, all three Traffic Lights will be illuminated, and a D symbol is…

138, Version 2.0 125 Configuration Operator’s Manual The setup is straight forward. Use the Change softkey to increment forward through the available choices. Use the Go Back softkey to increment backward through the available choices. You can also use the left and right cursor keys…

186, Navico mx420 Version 2.0 173 Beacon List Operator’s Manual REF2: 349 CAP. DES ROSIERS 48º51’ N.64º12’W. TBA kHz 100 baud ID:924 REF1: 322 REF2: 323 LA ROMAINE 50º12’ N.60º41’W. TBA kHz 100 baud ID:923 REF1: 324 REF2: 325 DEVIL’S HEAD 49º07’ N.58º24’W. TBA kHz 100 baud ID:9…

79, 66 Version 2.0 Operator’s Manual Waypoint Mark or Event This function key stores your present position, date and time at the next available waypoint location in the Waypoint Bank. A window pops up on the screen to confirm your key depression, and to tell you where the Mark positi…