Geemarc MyDECT 100 Operation & User’s Manual

64, 62 Three Way Conference Call When you have both an external call and an intercom call in progress, you can set up a three way conference call During an external call. press . Your external caller will be placed on hold Enter the handset number you wish to join the three way…

19, 17 On/Off Settings When the handset is placed on the charger it automatically switches on. Alternatively, press for about 5 seconds. The telephone will enter subscription mode in which the handset is searching for a registered base. On successfully finding a base, the LCD …

24, 22 Tone Setup A key tone is heard every time you press a key on the handset. This can be switched to silent. Note: Warning tones will still be emitted when an incorrect key is pressed. Press (left side) to activate the menu Use and to scroll through th…

9, 7 Handset Description (Rear) Battery Compartment Cover Speaker Contacts Battery Ct DESCRIPTION …

32, 30 Terminate Handset You can delete a handset registration from a base. Press (left side) to activate the menu Use and to scroll through the menu to select ‘BS SETTING’ Press (left side) to confirm Press (left side) again to select �…

33, Geemarc MyDECT 100 31 Dial Mode Setting In the UK, all telephone exchanges now use Tone dialling. The dial mode setting is pre-set to Tone. If your telephone does not dial out, it is probably being used from an older private switchboard (PBX). In this case, the dial mode must be changed…