Dinstar DAG1000 Series Operation & User’s Manual

6, DAG1000/2000 Series FXS/FXO Voice Gateway User Manual 1 Dinstar Technologies Co., Ltd. 1. Equipment Introduction 1.1 Overview Thanks for purchasing Dinstar DAG1000/2000 (Hereinafter referred to as the DAG) series FXS/FXO hybrid analog voice gateway. DAG1000/2000 s…

11, DAG1000/2000 Series FXS/FXO Voice Gateway User Manual 6 Dinstar Technologies Co., Ltd. 1）A quick confirmation tone (similar to call waiting tone) followed by a dial-tone. This indicates the transfer is successful. At this point, Caller A can either hand up or make another call. …

57, Dinstar DAG1000 Series DAG1000/2000 Series FXS/FXO Voice Gateway User Manual 52 Dinstar Technologies Co., Ltd. of routers and layer 3 switches) that the packets have traversed. The timestamp values returned for each router along the path are the delay (aka latency) values, typically mea…

10, DAG1000/2000 Series FXS/FXO Voice Gateway User Manual 5 Dinstar Technologies Co., Ltd. If the target IP address is 192.168.0.160, the dialing convention is *47, then 192*168*0*160. Followed by pressing the “#” key or wait 3 seconds. Complete signaling interactive so…

30, DAG1000/2000 Series FXS/FXO Voice Gateway User Manual 25 Dinstar Technologies Co., Ltd. 4.7 Port Configuration Port parameters include: Send gain, receive gain, primary display name etc. Figure 4.7-1 Port configuration interface Port parameters introduce as follows: Tx Gain …

23, DAG1000/2000 Series FXS/FXO Voice Gateway User Manual 18 Dinstar Technologies Co., Ltd. queues. IEEE 802.1p describes no admission control protocols. It would be possible to give Network Control priority to all packets and the network would be easily congested. Th…