Gemtek Systems T-316 Operation & User’s Manual

1, Wi-Fi Ethernet Smart Client T-316 User’s Manual Revision 1.0 T-316 User’s Manual Copyright © 2002 Gemtek Systems, Inc. …

15, 15 6. Technical Specifications Standards supported − IEEE 802.11 standard for Wireless LAN − All major networking standards (including IP, IPX) Environmental Operating temperature (ambient): − -10 ~ 50°C Humidity: − Max. 95% Non-condensing Power…

12, 12 4.6 Security WEP Enabled The default setting is Disable. Encryption (WEP)—additional measure of security on your wireless network which can be achieved by using WEP (Wired Equivalent Privacy) encryption. When an encrypted frame is received it will only be accep…

13, 13 Note: Only the following alphanumeric characters are allowed in the entry, which is 0 to 9, a to f. WEP Key to Use Use the pull-down menu to select the WEP key. All devices on the network must use the same key to communicate with one another. Deny Unencrypted Data For …

14, Gemtek Systems T-316 14 5. Troubleshooting Q: It‘s difficult to connect this device with exist wireless network. A: There are several possible causes based on the way the Wireless Ethernet Client is connected to the network. a. Problems on the wireless side Always check the status of the L…

16, 16 − 2 Mbps : DQPSK Data encryption: − 64-bits WEP Encryption − 128-bits WEP Encryption Utility Management: − Web management and TFTP firmware upgrade …