Alpha Technologies Novus Micro Operator's Manual

22, Alpha Technologies Novus Micro 17 3 Operation Alpha Technologies 3.5 Measuring the Output Power WARNING: The unit can be operated at any value up to 100%, but never run it when the 110% LED is on. Overloading can cause reduced runtime, unexpected shutdowns, or damage to the inverter. 3.6 Measuring the Battery Charge TIP: …

44, 39 Index Alpha Technologies Sting voltage, battery ............................................. 34 Support, technical .................................................... 5 Switching between Line and Battery modes ....... 25 Delay in switching ........................................…

14, 9 2 Installation Alpha Technologies 2.3 Wiring (Continued) 7 Connect the batteries together accord- ing to the diagrams to the right. 8 Place the batteries into the cabinet. 9 Connect the batteries to the unit’s battery connectors. DANGER: The unit’s and the battery’s conn…

7, 1 Unpacking 2 Alpha Technologies 1.1 Safety Checklists DANGER: Sealed lead-acid batteries with high energy and chemical hazards are used. This manual contains important operation and safety instructions. Only qualified personnel should service the Novus Micro. 1.1.1 Novus Micro Safety…

11, 6 Section 2 Installation This section describes how to install and wire the Novus Micro. • Site preparation checklist (Section 2.1). • Mounting (Section 2.2). • How to wire the unit to the loads, line and the batteries (Section 2.3). …

47, Alpha sales and service offices located throughout the world © 2004 Alpha Technologies http://www.alpha.com Printed In Canada 017–214–C0 04 / 04 Alpha Technologies 3767 Alpha Way Bellingham, WA, USA 98226 Tel: (360) 647–2360 Fax: (360) 671–4936 Alpha Technologies 4084 McConnel…