Brickcom PZ-040 12x Series Operation & User’s Manual

47, 43 8.2.2 Privacy Mask Add / Edit Privacy mask A privacy mask can be created to conceal areas within the camera’s view. The Privacy Mask List displays all the masks that are currently configured for the network camera and if they are enabled. NOTE – A …

32, 28 c. If the connection was successful, the user will see the message: “Congratulations. The installation of the camera is complete.” When this window is displayed, click <PC-NVR> to start the PC-NVR program, <Live View> to view …

18, 14 B. In the Install Shield Wizard dialog box, click <Next> to continue. C. Read the End-User License Agreement and check the option “I accept the terms of the license agreement”. Click <Next> to continue. …

66, 62 8.6 System 8.6.1 System Log a. System Log – Set up the camera to record a system log when an event is triggered. This page displays the system’s log in chronological order. The system log is stored in the camera’s buffer area and will be overwr…

9, Brickcom PZ-040 12x Series 5 Chapter 3 - Device Appearance Description < Bottom View > < I/O Connectors >   Light Sensor I/O Cable Video Out Microphone/Line In (Green) Audio Out (Red) General I/O Terminal Block DC Power Connector Etherne…