Brickcom VD-130A V2 Series Operation & User’s Manual

38, 34 6.3 Authentication To access the camera’s live view, open a web browser and enter the IP address of the camera. A dialog window will pop requesting a username and password. As stated on the previous page, for the default username and password for the Administrator …

45, 41 E. Flicker-Free Eliminate the problem of flicker. Click the Radio button to select outdoor or indoor mode based on the conditions. F. True Day & Night a. Auto - The Network Camera automatically removes the filter by judging the level of ambient light. b. Manual - In day m…

34, Brickcom VD-130A V2 Series 30 E. If the camera supports the EasyLinkTM function, the following page will be displayed. Otherwise, this page will not be shown. *If desired, click <Skip> to skip this setting. EasyLinkTM is a unique Brickcom function which allows users to assign a uniq…

72, 68 8.5.3 Device Information a. System Information – Displays the complete system information of the camera. b. Network Settings – Displays the complete network settings information of the camera. c. Video/Audio Settings – Displays the complete video/aud…

54, 50 8.2.3 DDNS (dynamic domain name service) DDNS links a domain name to an IP address, allowing users to easily access their camera even with a changing IP address. Brickcom network cameras are compatible with two DDNS service providers (1) DynDNS, and (2) TZO. NOTE - Be…

58, 54 8.3 Event 8.3.1 Event Settings When an event (such as unauthorized movement) occurs, the camera can be scheduled to perform certain actions. An Event Type is a set of parameters that defines these actions. This section describes how to configure the camera to per…