Metrologic Laser Scanner Operation & User’s Manual

52, 48 LASER AND PRODUCT SAFETY Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Under no circumstances should the customer attempt to service the laser scanner. Never attempt to look at the …

31, 27 TROUBLESHOOTING GUIDE (CONTINUED) SYMPTOMS POSSIBLE CAUSE(S) SOLUTION Alpha characters show as lower case. The computer is in Caps Lock mode. Enable Caps Lock Detect setting of the scanner to detect whether the PC is operating in Caps Lock. Everything works except for a couple of cha…

3, Metrologic Laser Scanner ii LOCATIONS CORPORATE HEADQUARTERS North America Metrologic Instruments, Inc. Customer Service: 1-800-ID-METRO 90 Coles Road Tel: 856-228-8100 Blackwood, NJ 08012-4683 Fax: 856-228-6673 Email: [email protected] Internet: www.metrologic.com EUROPEAN HEADQUARTERS Germany, Metrologic Inst…

18, 14 POWER SAVE MODES AND THE MULTI-FUNCTION BUTTON The MS7220 has five programmable power save modes. Refer to the MetroSelect Programming Guide for additional information on Power Save Modes. 1. Blink Power Save Mode (Default): “Blinks” the laser OFF & ON after a programmed period of…

13, 9 INSTALLATION FOR RS232 OR LIGHT PEN INTERFACES 1. Follow the “Getting Started” steps on page 3. 2. Turn off the host system. 3. Connect the PowerLink cable to the 10-pin RS232/Light Pen interface jack. It is the 1 st round opening from the left side of the MS7220. 4. Conn…

35, 31 DESIGN SPECIFICATIONS MS7220 DESIGN SPECIFICATIONS OPERATIONAL Light Source: VLD 650 ± 10 nm Laser Power: 0.678 mW maximum Depth of Field: 0 mm to 215 mm 8.5" at default (programmable) Scan Speed: 2000 scans/second Scan Pattern: 5 fields of 4 parallel lines (omnidirectional) Scan…