DNP DS?RX1 Operation & User’s Manual

12, DSRX1 Manual Version Number: 1.01 12 Connecting 1. Make sure that both the printer and the computer power switches are set to the OFF position. 2. Plug the cord connector end into the printer Power Plug Socket. 3. Plug the cord into the wall outlet. 4. Connect the USB cable to …

5, DSRX1 Manual Version Number: 1.01 5 Do not plug or unplug the cord with wet hands. This could cause electric shock. Do not open the inside of the printer, disassemble internal parts, or modify the printer. It could cause electric shock, fire, or injury, or break the pri…

17, DSRX1 Manual Version Number: 1.01 17 7. Set the ribbon into the printer. Unite and insert as shown below. Turn the take‐up side of the ribbon in the direction indicated by the arrow to take up any slack. Wind ribbon as shown: 8. C lose the front cover. When …

13, DNP DS?RX1 DSRX1 Manual Version Number: 1.01 13 Media (Paper & Ribbon) Caution Set the paper and ribbon without putting them directly on the work surface. Any dust or dirt could get inside the printer and adversely affect the print quality. With a new roll …

11, DSRX1 Manual Version Number: 1.01 11 Names of Components Please be careful not to hurt yourself or damage anything on the edges of the printer. Caution …