Meyra 2.263 Operating Manual

55, Meyra 2.263 1 2 55 Wheel change A wheel/tyre change requires tech- nical knowledge. You should there- fore have this work carried out by a specialist workshop. Sitting on the SCOOTER during a wheel change is not permitted. The SCOOTER must stand on a level and fi rm surface. Be- fore removing a wheel,…

74, 74 The product conforms with the EC Directive 93/42/EEC (MDD) for medi- cal products GUARANTEE We accept a guaranty for this prod- uct according to the legal regulations. Apart from this we warrant: – 4 years for frame. – 2 years on the electronic and vehi- cle parts. – 1 year on batter…

69, 69 Inspection certifi cate Vehicle data: Vehicle identifi cation No. Delivery note no.: Model: Stamp of specialist dealer: Next safety inspection in 12 months Date: Place, date: Signature: Pre-delivery inspection Stamp of specialist dealer: Next safety inspection in 12 months Date: Place, d…

33, 1 2 3 4 5 33 Removing the drive unit 1. First pull out the locking bolt (1), the swivel the now unlocked drive from the front chassis. ☞ Note: For easier unlocking tilt the drive over the handle (2) slightly to the back. At the same time press the front chassis over the seat tube (3) …

56, 2 1 56 Dismantling the steering wheels Before replacement or repairs the protection cap has to be pulled off of the hexagon nut (1), then the steering wheel is to be disassembled by remov- ing the hexagon nut (1). ☞ Note: ☞ After attaching the steering wheel the hexagon nut (1) is …

31, 1 3 5 2 4 31 Removing the batteries 1. Switch off the SCOOTER and pull out the drive key. 2. Remove the seat (1). – For this activate the locking lever (2). 3. The ball grip of the selection le- ver has to be screwed off before removing the rear panelling is re- moved (3)…