Gentex 710LS Manual, Installation Instructions

1, 710LS 713LS PHOTOELECTRIC TYPE SMOKE ALARMS WITH VISIBLE NOTIFICATION APPLIANCE, AC POWERED, 120V, 60Hz Installation Instructions - Owner's/User's Information Manual - READ CAREFULLY AND SAVE INTRODUCTION The 713LS smoke alarm is a photoelectric type smoke alarm for use as …

2, Gentex 710LS  Teach children what the smoke alarm signal means, and that they must be prepared to leave the residence by themselves if necessary. Show them how to check to see if doors are hot before opening them, how to stay close to the floor and crawl if necessary, and how to use the alterna…

3, FIGURE 4 FIGURE 3: IN DWELLING UNITS WITH MORE THAN ONE SLEEPING AREA, A SMOKE ALARM MUST BE PROVIDED TO PROTECT EACH SLEEPING AREA IN ADDITION TO SMOKE ALARMS REQUIRED IN BEDROOMS. FIGURE 2: A SMOKE ALARM MUST BE LOCATED BETWEEN THE SLEEPING AREA AND THE REST OF THE DWELLING UNIT AS WELL …

4, FIGURE 6 Place the smoke alarm up to the mounting plate, rotating it to about 10:00 o'clock then rotate it clockwise to 12:00. It should "snap-lock" firmly into place. Keep the smoke alarm parallel to the mounting plate so upper and lower tabs on the plate seat into the smoke …

5, FIGURE 9 dirty and should be cleaned as described in the maintenance procedure below. If the smoke alarm continues to alarm for TEST 2 position following cleaning return it to Gentex for service. d. To check for proper smoke entry into your smoke alarm's sensing chamber. Gentex recommend…