Microh ARENA ULTRA WASH ii Operation & User’s Manual

25, 24 9. Technical Specifications Power supply EU-model: 208/230/240 V AC, 50/60 Hz ~ US/Canadian-model: 100/115/208/230 V AC, 50/60 Hz ~ Power consumption: 800 W Fuse: T 10 A, 250 V Lamp PHILIPS MSR 575/2 or MSD 575 Optical System - H igh luminous-efficient parabolic mirror - …

11, 10 The ARENA ULTRA WASH can be placed directly on the stage floor or rigged in any orientation on a truss without altering its operation characteristics (see the drawing). The fixture’s base enables it to be mounted in two ways. Use the clamps with M10 or M8 …

13, Microh ARENA ULTRA WASH ii 12 4. DMX-Protocol 4.1. Function of the control channels – 16-bit protocol Channel 1 - Horizontal movement (Pan) Push the fader up in order to move the head horizontally (PAN). Gradual head adjustment from one end of the fader to the other (0-255, 128-center). The he…

12, 11 3.4. DMX-512 connection / connection between fixtures The wires must not come into contact with each other, otherwise the fixtures will not work properly if at all. Use only a stereo-shielded cable and 3-pin XLR plugs and connectors in order to connect the controller with the …

26, 25 Pan/Tilt Pan movement range 530° Tilt movement range 280° 8/16-bit movement resolution Automatic Pan / Tilt position correction Maximum PAN-movement 530° in 3 s Maximum TILT-movement 280° in 2.2 s Rigging Stands directly on the floor Mounts horizontally or vertica…

15, 14 Channel 13 – Effect wheel 0 - 70 Full beam 71 - 230 Beam-shaper 231 - 255 Frost-filter Channel 14 - Zoom 0 Zoom 7° 255 Zoom 28° Channel 15 - Shutter, Strobe 0 - 31 Shutter closed 32 - 63 No function (Shutter open) 64 - 95…