Gerber Tempo 600 Setup Manual And Quick Start Manual

14, Gerber Tempo 600 6. Set the cutting conditions Typical settings Material Thickness (mm) Blade Cutting Force Speed Quality Outdoor vinyl 0.05 to 0.08 CB09UA 10-14 1-30 2  (for small size character cutting) 0.05 to 0.08 CB15UB 10-14 1-20 1 Film for decoration 0.08 to 0.1 CB09UA 14-17 1-30…

6, 5 The screen displays the following message. Make sure the Tempo 600 is NOT connected to the power outlet. 6 Click OK and read the following message about Digital Signatures. 7 Click OK. The following screen displays. 8 Choose USB from the Port Name drop-down me…

9, 7. Installing Gerber Tempo as a Windows Printer It is not necessary to install the Gerber Tempo as a Windows printer to send jobs from OMEGA. Installing the plotter through Windows gives you additional flexibility to use the plotter from other programs such as Adobe Illustrator�…

4, 5 Click OK and the following message displays. 6 Read the message and click OK. The Port Name screen displays. 7 Choose USB from the drop down menu and click OK. The Windows warning displays. 8 Click Continue Anyway to complete the driver installation. …

12, 3. Load the media 3.1 Lower the set lever. 3.2 Installing media on the roll media stand. 3.3 For roll media, pull out the media 3.4 For sheet media, pass through the and pass through the plotter. plotter as shown. 3.5 Align the me…