Dot-x SERIES Operation & User’s Manual

1, DOT-X SERIES Handheld Addressable Remote Controls Publication No. 01121 Rev B 160 FIRST STREET S.E. ST. PAUL, MN 55112-7894 PHONE 651-633-1742 FAX: 651-633-1065 www.dotronix.com User’s Manual …

3, Dot-x SERIES Congratulations on your purchase of a new DOT-X Series with HARC (Handheld Addressable Remote Control) option. This manual has been prepared to act as a guide in the operation of your unit when the HarcPlus option is installed. Please read the following operating instructions carefully before usin…

9, SECURITY CODE CHANGING SECURITY CODE AND UNIT NUMBER The security code and the unit number can be changed with the remote control. First it is necessary to enter the current security code and unit number, refer to GETTING STARTED earlier in this manual for the procedures to enter…

7, Off On Power Switch IR Enable Switch AVAILABLE MENUS Your unit is menu operated. In other words, adjustments to the unit are made via a list of choices which appear on your monitor screen. To view these menus, press the MENU key on the remote. Press MENU repeatedly to toggle …

4, Stand in front of the unit (monitor) and aim the remote at the InfraRed (IR) receiver located on the upper left corner of the unit. Press and hold the ENTER key on the remote for several seconds (typically 6 to 8 seconds). The following on screen display (OSD) will appear. MODEL M b…