Microscope Net MD827S30 series Operation & User’s Manual

5, Microscope Net MD827S30 series www.microscopenet.com - 3 - 1 Components Illustration 1 Eyepiece 10 Viewing Head w/ Camera 19 Power Switch 2 Diopter Ring 11 Head Thumb Lock Screw 20 Condenser Lock Thumb Knob 3 …

11, www.microscopenet.com - 9 - 3.8 Adjusting iris aperture diaphragm Swing the iris diaphragm lever (Fig. 9) left or right to adjust the aperture size. Note: The iris diaphragm is designed to adjust the aperture size, not to adjust the brightness although the brightnes…

7, www.microscopenet.com - 5 - 2.5 Installing (or changing) the halogen bulb 1) Turn off the power switch and disconnect the power cord. 2) Allow some time to cool down the lamp. 3) Turn over the microscope on its side; find the bulb compartment at the bottom. 4) …

3, www.microscopenet.com - 1 - i. Caution 1. Open the carton carefully with a knife or paper cutter. Find the “UP” sign and place the Styrofoam container on the side that makes the arrow upward. If the “UP” sign is missing, please open the Styrofoam container gently to…

18, www.microscopenet.com - 16 - 3) Raise the condenser till the top lens is close to the opening of stage. Place a drop of immersion oil on the top of the lens of the condenser. 4) Place the slide on the stage. Raise the condenser and let the oil drop contact the bottom of …