Hobie Mirage Tandem Island Assembly Manual

9, 1. IMPORTANT! B e f o r e r a i s i n g t h e m a s t , lo o k o v e r h e a d f o r powerlines. !CAUTION! WATCH FOR OVERHEAD POWER LINES WHEN HANDLING THE SAIL AND MAST. NEVER RIG, TRAILER, OR SAIL THE BOAT NEAR OVERHEAD POWER LINES. MAST CONTACT WITH A POWER LINE C…

5, List of Parts When unwrapping your new Hobie Mirage Tandem Island, be sure to check that all parts are included and that the boat is in good order. Find a clean spot, lay out all of your components and run through the checklist. Hull and Crossbars 1. Ho…

4, Hobie Mirage Tandem Island MAST The mast is a two-piece design for easy trailering and storage. HULLS The Tandem Island's main and ama hulls are contructed from Polyethlene, prividing an extremely durable hull that is highly resistant to dings and scratches. MAINSHEET SYSTEM The mainsheet is design…

12, Launching For safety, and to ensure that you have control of the boat at all times, we recommend the following steps when launching. These instructions start with the assumption that the boat is in the water with the Mirage Drive in, the sail rolled up, an…

2, 1 WELCOME TO THE HOBIE WAY OF LIFE Congratulations on the purchase of your new Hobie Mirage Tandem Island and welcome to the Hobie family. The Hobie Mirage Tandem Island cannot be outgrown (how do you outgrow fun?) and will provide years of enjoyment for ev…

7, 6 7. Now rotate the base of the mast so that the hole on the mast collar aligns with the line. Feed the line through the hole and pull back up to the sail sleeve. Pull some tension in the line and cleat off the end into the jam cleat on the sail sleeve. 8. Roll the sail on…