Cloud CXM Installation & User Manual

13, CXM Technical MANUAL 12 4.01 X-Filter When used in conjunction with the crossfade the X-Filter facility on the M2 allows the user to mix selected bands of frequencies from one crossfade busbar together with selected frequencies from the other busbar. The three X-Filter buttons on the left-hand…

1, CXM Mixer Installation & User Guide Cloud Electronics Limited 140 Staniforth Road, Sheffield, S9 3HF England Tel +44 (0)114 244 7051 Fax +44 (0)114 242 5462 e-mail [email protected] web site http://www.cloud.co.uk …

15, Cloud CXM CXM Technical MANUAL 14 4.14 PFL Output A -2dBu PFL output is provided on a stereo pair of phono sockets. This signal is derived from the PFL and split cue circuits. The output is identical to the signal on the headphone output though it is not affected by the phones volume control…

6, CXM Technical MANUAL 5 CS1 Stereo Music Module 2.01 This module contains RIAA equalised phono and line level amplifiers, sub-sonic filter, equaliser, auxiliary sends, channel fader, crossfade assign, mono switch, PFL select logic and remote start switch. Inputs are by way of gold plated RCA phono s…

20, CXM Technical MANUAL 19 General 6.01 Interfacing a tape deck for recording purposes. The M2 master module is fitted with a total of two stereo pairs of record output sockets, all using RCA type phono sockets. One pair carry the main output signal: this output is controlled by the m…