CM Labs Workstation Console Owner's Manual

15, Mixer Controls CM Labs MotorMate Owner’s Manual Page 15 Channel In/Out Assignment Press and hold SHIFT (on the MotorMate lower panel) and then press “assign” on the MotorMate lower panel. The “assign” LED will flash to show that assignment is in process. During assignment, th…

10, Page 10 CM Labs MotorMate Owner’s Manual Operations The MotorMate operations and features described in this manual are detailed to describe its operations primarily with ProTools from Digidesign. Although MotorMate operates with several other DAW platforms, some of the feature…

16, Mixer Controls Page 16 CM Labs MotorMate Owner’s Manual PLUG-IN Operations Insert Control With one of the channel SELECT LED’s on, press the PLUG-IN switch (fifth switch up to the left of the faders), and the Rotary Display will display “IN” for insert. The inserts for the sele…

24, SHIFT Generally speaking, SHIFT is used to add things to a selection of controls, channels, or tracks. For example, press and hold SHIFT down and then press several channel SELECT switches. All the SELECT switches that were pressed will then have their LED’s lit to show that they…

22, Page 22 CM Labs MotorMate Owner’s Manual Transport Controls Scrub and Shuttle Controls When scrub or shuttle are engaged, only certain of the controls on MotorMate will remain active: 1.) Jog wheel and Jog select switch. 2.) Transport switches (which cause shuttle or scrub to …

20, CM Labs Workstation Console Mixer Controls MUTE and SOLO These switches activate the DAW console mute and solo functions. The LED’s in these switches reflect the mute and solo state of the DAW console. Additionally, press and hold the OPT switch and either a MUTE or SOLO switch to clear or set all mutes or solos on th…