Home Automation Omni Pro II Installation Manual

39, Page 33 DESCRIPTION OF 4/2 FORMAT The 4/2 format consists of a four-digit account code, from 0000 to FFFF and a two-digit alarm code from 00 to FF. When the digital communicator calls the central station receiver, the latter answers and sends a brief 2300 Hz tone or a 1400 Hz tone ca…

3, Home Automation, Inc. Installation Manual Includes the SIA CP-01 Control Panel Standard Features for False Alarm Reduction Document Number 20I00-2 Rev. 3.2 August, 2009 Copyright © 2001-2009 Home Au…

78, Page 72 Automatic Cycling of Switched Power when the System is Disarmed Whenever the OmniPro II security system is disarmed, the controller will cycle power to the SWITCH 12V or a Switched Power Output to reset smoke detectors and other latching devices. In previous versions of c…

12, Home Automation Omni Pro II Page 6 TWO-WIRE SMOKE DETECTORS Om niPro II supports two-wire smoke detectors connected to Zones 1-4. 1. Use normally open (closed for alarm) two-wire "SYSTEM" type smoke detectors (See - 2-Wire Smoke Detector Compatibility Chart). 2. Smoke detecto…

67, Page 61 SMOKE DETECTOR INSTALLATION GUIDELINES 1. Ceiling mounted smoke detectors should be located in the center of the room or hall, or not less than 4 inches from any wall. When the detector is mounted on a wall, the top of the detector should be 4 to 12 inches from the ceiling. …

69, Page 63 APPENDIX B - DIGITAL COMMUNICATOR CODE SHEET INFORMATION FOR CENTRAL STATION Date: _________________________ Subscriber Name: ______________________________________________________________________ Address 1: _______________________________________________…