DTS Raptor Operation & User’s Manual

27, 27 CALIBRATION COLOUR WHEEL MENU ENTER DOWN UP MOTORS ALIGNMENT 111 CALIBRATION FROST ZERO MENU ENTER DOWN UP MOTORS ALIGNMENT 61 CALIBRATION FIXED GOBO MENU ENTER DOWN UP MOTORS ALIGNMENT 135 CALIBRATION FROST PATH MENU ENTER DOWN UP MOTORS ALIGNMENT 149 CALIBRATION PRISM PATH MENU ENTE…

11, 11 1) Loosen the 3 “¼ turn” screws which fix the head covers on both sides (picture 1) . 2) Once loosened the screws, simply lift the covers to access the internal components (picture 2). PICTURE 1 …

20, 20 11.1-DMX Addresses RAPTOR can be controlled with 18 DMX channels. In order to use the unit in 18 channels, set the following addresses on the mixer: Projector 1 A001 Projector 2 A019 If you want to select the next projector, just add “18” Projector 3 A037 ….. …

10, 10 7- MOUNTING / REPLACING THE LAMP AND LAMP ALIGNMENT WARNING Turn off the lamp before opening the unit head covers. Never look directly at the lamp when it’s lit. Discharge lamps emits UV rays; radiation from this lamp can cause damage to eyes and ski…

33, 33 DMX CHANNEL 7 Parameter: DIMMER DMX value Function 000-007 Black-out 008-255 Proportional dimmer DMX CHANNEL 8 Parameter: SHUTTER DMX value Function 000-019 Black-out 020-039 Open 040-059 Black-out 060-079 Strobe random speed …

15, DTS Raptor 15 8- VOLTAGE AND FREQUENCY The RAPTOR with electronic ballast can operate at 90-260V 50 or 60 Hz. 9- INSTALLATION RAPTOR may be either floor or ceiling mounted. For floor mounting installations, the RAPTOR is supplied with four rubber mounting feet on the base. For ceiling mo…