Nel-Tech Labs iLink Installation & User Manual

3, Index: Introduction ........................................................................................................................ iLink Layout Summary..................................................................................................... Installation ...........…

8, Nel-Tech Labs iLink 8 Connectivity Troubleshooting: Step 1: Verify the iLink has been assigned an address by the network. a. Place the “Documentation and Utilities” CD on a computer on the local network. b. Browse the CD and run the NTL Studio Utilities program. c. Click on the “Scan Network” butt…

9, 9 Step 3: Verify the iLink has been assigned at least one Connect-Back address. a. Open a web browser and type the DHCP assigned or manually assigned Static IP address. If the NTL Studio Utilities program is still open, then the “Congure IP” button can be clicked for th…

11, Limited Warranty TERMS: Nel-Tech Labs warrants to the original purchaser (“Buyer”) that the Product sold is free from defects in material and workmanship at the time of purchase. The warranty period begins at the time of Product’s original purchase by the rst end-user. The warranty…

6, 6 Connectivity Test: Step 1: Turn the power switch to ON while holding in the DOWN VOLUME button for 5 seconds. Step 2: The CHANNEL A and CHANNEL B LEDs should both BLINK ORANGE while trying to connect to server, once connected both LED’s should be SOLID ORANGE. Step 3: After su…