Neostar Electronics NFS2 Operation & User’s Manual

8, 11 (1)Hold up the Photo Holder so that the front of the photo is facing you. (2)Insert the photograph into correct size holder as pictured. (3)The photo should now be perfectly visible in the holder. (4)Insert the holder into the scanner. Loading Photographs Options within playback mode 1.Rotat…

3, Neostar Electronics NFS2 Important: Do not expose this product to rain or moisture. Caution: Do not disassemble this unit. To prevent this risk of electric shock, do not remove cover. Ventilation: The device should be situated so that its location or position does not interfere with its proper ventilation. For exa…

9, 10 1.Power the scanner by connecting to the mains electric (cable supplied) or you can power directly from the USB connection to your PC (cable also supplied). Switch scanner on using the power button. 2.Load negatives / slides / photos into holder as described on previous pages. 3…

6, USB/Power In TV Out SD 13 Pc connect (1)Hold up the slide toward the light. Face the trademark slide of the slide away from you. Look through the slide and it should appear normally (not a mirror image). Now turn the slide so the image is upside down while look…

1, Multi-function Scanner USER MANUAL Photos, Slides and Negatives to Digital Thank you for purchasing your Neostar Scanner. Please read and retain these instructions for future reference. Extra 3-packs of Slide or Negative Holders are available to purchase directly from the www.neostar-electronic…

10, 9 8 When image quality (5MP / 10MP) has been selected, the image can be captured (takes about 3 seconds). Once you have pressed ‘scan’ you will see the scanned image display on the LCD screen. Shooting mode Scanning amount available Resolution Sign to card If you need ‘mirror’ ima…