COHU 3950 SERIES iVIEW Installation And Operation Manual

6, 6X-1027a 6 INSTALLATION AND OPERATION 3950 iVIEW 2. Wall Mount (WALL model) This mounting arrangement requires an arm that bolts to the wall and an adapter plate between the arm and the bottom of the Positioner. The arm is typically supplied with this adapter plate already install…

8, 6X-1027a 8 INSTALLATION AND OPERATION 3950 iVIEW 2.3 EQUIPMENT SUPPLIED Depending on the mounting configuration, several variations of equipment can be supplied. See table 2 for a list of the basic differences between models as related to mounting. PEDD (Small Pedestal Base). See fig…

2, 6X-1027a 2 INSTALLATION AND OPERATION 3950 iVIEW Changes or modifications to this equipment not expressly approved by Cohu Electronics could void the users authority to operate the equipment. LIST OF SECTIONS LIST OF TABLES TABLE TITLE PAGE 1 Specifications 3 2 Equipment vs. Model Number 5 3 Requi…

15, COHU 3950 SERIES iVIEW 6X-1027a 15 INSTALLATION AND OPERATION 3950 iVIEW Figure 11. Cable CA-297A (RS-422) Stripped Leads Version Always pre-plan all system cabling before starting an installation. Before an iView is bolted in place, the system cable must be available to attach to the pigtail cable at the mounting locatio…

9, 6X-1027a 9 INSTALLATION AND OPERATION 3950 iVIEW ARM ADAPTER PLATE NOTE: Arm is typically shipped with Adapter Plate attached WALL  Route system cable through hole in wall into Arm Use weather-tight gasket between Arm and wall POSITIONER CABLE (Route through Adapter Plate into Arm) POS…

24, 6X-1027a 24 INSTALLATION AND OPERATION 3950 iVIEW COHU Cohu Inc., Electronics Division CO HU EL EC TR ONI CS WA RR ANT YCO HU EL EC TR ONI CS WA RR ANT Y Cohu, Inc., Electronics Division warrants equipment manufactured to be free from defects of material and workmanship…