DVTEL mmp100dn Installation Manual

32, mmp100dn Installation Manual 22 A.4. Troubleshooting This section provides useful information and remedies for common situations where problems may be encountered. Problem Possible Solution No network connection Hardware issues: Check that the network is working and …

29, DVTEL mmp100dn Appendix 19 A.2. Connecting Leads to a Spring Clamp Terminal Block The unit is delivered with two terminal block connectors. The connectors enable you to connect wires for either the relay output or alarm input and then connect them to the unit. Figure 12: Spring Clamp Terminal…

18, mmp100dn Installation Manual 8 3.2.1 Fitting a Lens to the Unit The unit is supplied without a lens. You will need to fit a lens on the front panel of the camera (CS mount) before installing and connecting the unit. To fit a lens to the unit 1. Remove the cap covering the lens …

21, Installing and Connecting the Unit 11 8. In the Unit network configuration area, enter the IP address, Subnet mask, and Gateway IP address. Note: It is possible to set the IP address without changing the subnet. 9. If you use a DHCP server, select the DHCP checkbox…

12, mmp100dn Installation Manual 2 2.1 Items Included in the Package The unit package contains the following items: QTY Description 1 mmp100dn camera 1 Terminal block spring clamp connectors (for relay outputs and alarm inputs) 1 Terminal block spring c…

1, mmp100dn Installation Manual Rev E March 2014 DVTEL INC. 65 Challenger Road Ridgefield Park, NJ 07660 The contents of this guide may not be reproduced or reprinted in whole or in part without the express written permissi…