Comm-Tec ProPLAY Operation & User’s Manual

11, 11 of 21 MUTE (Button 8) · When MUTE is pressed, all the tracks will have no sound. · Press MUTE again to resume the normal sound in all tracks. All above buttons can be re-defined by ProPLAY Studio software if operating in playlist mode. 5. USB Host Update Important Notice: This f…

9, 9 of 21 Auto-Loop Playback After Track 1 is set to play, it will play to the end, then Track 2 will start playing from beginning to end, then Track 3 etc. When the ProPLAY Audio plays to the end of the last track, it will automatically jump back to the beginning of Track 1, repeating t…

7, 7 of 21 4. User Instruction 4.1 Quick Start Instruction Never connect or disconnect parts of the system when the system is powered up as this may cause serious damage. Connection and usage are straightforward. However, care needs to be taken with the following: · Ensuring parts have b…

18, 18 of 21 Example of „Play“ In this example, the player will play media if you feed „30 30 30 31 0D“ from terminal through RS- 232. Example of „Stop“ In this example, the player will stop if you feed „30 30 30 32 0D“ from terminal through RS-232. …

17, 17 of 21 6. RS-232 Commands on ProPLAY Audio 6.1 Connection Connect your ProPLAY Audio through RS-232 port. The baud rate setting of 9600 N81 must be used. Note: The ProPLAY Audio needs special firmware for this function. 6.2 Command Code All the command codes are stored and defined i…

16, Comm-Tec ProPLAY 16 of 21 Files present in USB only If the file(s) only be found on USB memory stick but not on CF, then those files will be copied to CF. Option 1 – Copy the files from USB to CF Option 2 – Do nothing …