GlucoRx TD-4277 Owner's Manual

18, 18 Control Solution Testing TaiDoc Control Solution contains a known amount of glucose that re- acts with test strips and is used to ensure your meter and test strips are working together correctly. Do a control solution test when: you rst receive the meter, at least once a week to routinely …

24, 24 Performing a Blood Glucose Test 1. Insert the Test Strip to Turn on the Meter Wait for the meter to display the test strip and blood drop symbols with Gen preset. 2. Select the appropriate measuring mode by pressing M button. For selecting the measuring mode, please …

44, For self-testing. TaiDoc Technology Corporation 3F, 5F, No.127, Wugong 2nd Road, 24888 Wugu Township, Taipei County, Taiwan www.taidoc.com MedNet GmbH Borkstrasse 10, 48163 Muenster - Germany Tel:+49 251 322660 Fax:+49 251 3226622 Distributed by DIME 4 Wintonlea, Monument Way West Woking, …

26, 26 5.Read the Result The result of your blood glucose test will appear after the meter counts to 0. This reading will automatically be stored in the memory. Always follow the instructions in the lancing device insert when removing the lancet. The used lancet and test strip may be bio…

4, Dear GlucoRx Nexus System Owner: Thank you for purchasing the GlucoRx Nexus Blood Glucose Monitoring System. This manual provides important information to help you to use the system properly. Before using this product, please read the following contents thoroughly and careful…

20, GlucoRx TD-4277 20 Out-of-range results If you continue to have test results fall outside the range printed on the test strip vial, the meter and strips may not be working properly. Do NOT test your blood. Contact your local customer service or place of purchase for help. The control solution ra…