Netphonic NG-48 Series Operation & User’s Manual

23, Netphonic Systems NG-48 User Manual 23 Agent is common. Enable SIP Stun Configure enable/disable SIP STUN; Enable Private Server Register Configure permit/deny private server register; Enable Private Outbound Proxy Configure enable/di…

15, Netphonic Systems NG-48 User Manual 15 Port Register Username Configure SIP register account（usually it is the same with the port number that configured, some special SIP servers will have different port configurations, then the p…

29, Netphonic NG-48 Series Netphonic Systems NG-48 User Manual 29 alias can be divided into four types, it should be combined with replacing length to make the setup: Add: xxx, add xxx before number. in this way it can help user save the dialing length; All: xxx, th…

32, Netphonic Systems NG-48 User Manual 32 4.8 Upgrade on-line 4.8.1 Upload WEB page On this page, user can select the upgrade documents (firmware or config file) on hard disk of the computer directly to run the system upgrade. After the upgr…

18, Netphonic Systems NG-48 User Manual 18 4.5 Advance configuration 4.5.1 Net Service configuration User can set up Telnet, HTTP, RTP port on this page and view DHCP table. …

12, Netphonic Systems NG-48 User Manual 12 Configuration explanation: H323[Unregistered] Configuration Show H323 register state; if register successfully, it will show Registered in the square bracket, otherwise show Unregistered. Default G…