GME TX3345 Instruction Manual

21, TX3345 INSTRUCTION MANUAL PAGE 21 Removing the microphone 1. Slide the rubber boot back along the microphone cord. 2. Squeeze the plastic tab on the microphone plug towards the plug to unlock it while gently pulling the plug outwards. If the plug does not come out easily, the…

15, TX3345 INSTRUCTION MANUAL PAGE 15 NOTE: If the call is not sent within 10 seconds of entering the last Ident digit the Call function will time-out and the radio will return to normal mode. To exit the mode without sending the Selcall briefly press the CALL button. CAll ACKnowl…

23, TX3345 INSTRUCTION MANUAL PAGE 23 CTCSS TONE FREQUENCY CHART 50 Tone Set 38 Tone Set Frequency 50 Tone Set 38 Tone Set Frequency 50 Tone Set 38 Tone Set Frequency 1 1 67.0 18 17 118.8 35 - 183.5 2 - 69.4 19 18 123.0 36 30 186.2 3 2 71.9 20 19 127.3 37 - 189.9 4 3 74.4 21 20 131.8 38 31 192.8…

17, TX3345 INSTRUCTION MANUAL PAGE 17 Setting up QUIET mode To setup the Quiet mode you must first ‘tag’ the channels that you want to stay Quiet, then activate the Quiet Mode. Once the Quiet mode is activated, the tagged channels will remain quiet to all incoming signals unless you…

9, GME TX3345 TX3345 INSTRUCTION MANUAL PAGE 9 Channel Selected Receive Channel Transmit Channel 1 1 31 2 2 32 3 3 33 4 4 34 5* 5* 35* 6 6 36 7 7 37 8 8 38 41 41 71 42 42 72 43 43 73 44 44 74 45 45 75 46 46 76 47 47 77 48 48 78 *Emergency Channel only DynAMiC VoluMe Control (DVC) The modulation level of sign…

19, TX3345 INSTRUCTION MANUAL PAGE 19 e.g. Sending Ident 145A5 will call radios 14505, 14515, 14525, 14535.. --> 14595 Call acknowledge in Group mode There is no call acknowledge when sending group calls. This is to prevent all the radios in your group from trying to respond to your Selca…