Koolance PC3-700 Series Operation & User’s Manual

4, iii User Manual Table of Contents Introduction 1 PC3-700 System Diagram .............................................................................. 4 LED Display Panel .......................................................................................... 5 Connecting PC3-700 …

22, 17 User Manual Testing & Filling Once all of the coolers have been connected, the system can be fi lled with coolant. The refi ll tap is located on top of the reservoir. Remove the large slot-headed screw (with a screwdriver or large coin) and insert the refi ll funnel. Cut …

18, 13 User Manual Disconnecting Hoses Nozzles are designed to attach tightly. If you need to remove a hose for any reason, it may not pull off easily, even after unscrewing the compression fi tting. Usually, a connection will come free by squeezing the hose on top of the nozzle and pull…

29, Protected by U.S. Patents 6,664,627; 6,313,990; 6,234,240; 5,731,954 Other Technology Pending U.S. & World-Wide Patents Superior Liquid Cooling Systems ® English v1.01 PC3-700 Series User’s Manual PC3-700 Series User’s Manual www.koolance.com ISO 9001 Printed in Korea …

2, i User Manual This User Manual is updated regularly. Please be sure to check our support page for a newer version of this guide: www.koolance.com/support GENERAL PRECAUTION Please read this manual carefully before beginning the installation of your Koolance system. This manual assumes t…

23, Koolance PC3-700 Series 18 The liquid coolant should be fi lled up to about 1.5 cm (1/2”) from the reservoir’s top. This small gap will catch air as it circulates through the system. Do not overfi ll. It is recom- mended to keep paper towels on hand just in case. Allow the pumps to run for about 1-5 …