Evo Professional classic Owner's Manual

17, 17 WARNING Installing LP Tank To Grill Refer to the diagram at the right and complete the fol- lowing steps: 1. Be sure both grill burner valves are in the Off position. 2. Make sure the gas tank valve handwheel is in the closed position. Turn clockwise ( left to right ) to a full st…

5, 5 Notes Complete Now For Future Reference Serial # _____________________________ Date of Purchase ______________________ Place of Purchase _____________________ To Installer or Person Assembling Grill: Leave these instructions with consumer. To Consumer: Keep these instructions for…

15, 15 Assembling Your Grill Hood Handle & Hood Support 1. Install handle to outside of hood by locating phillips screws (70) through the handle and into the hood. 2. From inside hood, simultaneously install the hood support with phillips screw, making sure the hood support slots are fac…

13, 13 7. Assemble leg to the burner unit using philips screw (40), and nyloc hex nut (41). 8. Use 7/16” open-end wrench and phillips screwdriver tools to fasten the legs to burner unit. Securely tighten screws by holding screwdriver steady against the screw head while using…

2, Evo Professional classic 2 WARNING WARNING WARNING This symbol identifi es the most important safety messaging in this manual. When you see this symbol, be alert to the possibility of serious bodily injury if the instructions are not followed. Be sure to read and carefully fo…

16, 16 Installing LP Tank To Grill Propane (LP) Models Only 1. From right side of grill, grasp removable leg support at each end and lift upward. Once the leg support is disengaged from the keyway fasteners, lift leg support outward. The keyway fasteners are tensioned with a spring that secures…