Oasis Mirage Instruction Manual

3, Oasis Mirage WATER DISPENSER CONTROLS 1. Control panel 2. Heating 3. Ready-to-dispense indicator lights Red Light: “Flashing” = Heater (hot water tank) is operational Red Light: “Steady On” = The hot water has reached optimum temperature and is ready for dispensing. Red Light: “Off” = Ho…

4, OPERATING INSTRUCTIONS Initial Product Cleaning Procedure Like most appliances, your water dispenser requires periodic maintenance for maximum efciency and performance and must be cleaned on a regular basis (i.e. every 4 months). To maintain a hygienic environment within your water dispenser…

5, The Mirage can use 3 or 5 gallon water bottles. This unit also easily converts to a direct water line. Please see page 7 for instructions on installing this unit direct to a water line and ltration system. Installing the Water Bottle oasiscoolers.com Page 5 IMPORTANT: Always wash…

8, 6. Assemble the lter as per individual instructions. F - Filter set sold separately. 7. The lter bracket has several hole patterns to accommodate different lter mounting congurations. It may be necessary to provide your own holes per your individual lter i…

6, Back of Cooler IMPORTANT: DO NOT BREAK OR REMOVE THE SEAL FROM AROUND THE NECK OF THE WATER BOTTLE, (See Fig. 5) OTHERWISE YOU WILL NOT BE ABLE TO LIFT/CARRY THE WATER BOTTLE WITH THE CARRY HANDLE. (See Fig. 6) 5. To install the water bottle inside the bottle storage compartment, simp…

10, CLEANING AND MAINTENANCE Like most appliances, your water dispenser requires periodic maintenance for maximum efciency and performance and must be cleaned on a regular basis (i.e. every 4 months). To maintain a hygienic environment within your water dispenser and prevent potent…