GoPro Hero 3 Black edition Operation & User’s Manual

62, 61 caMera asseMblY ATTACHING ADHESIVE MOUNTS PRO TIPS: Apply to clean surface only. Wax, oil, dirt or other debris will reduce adhesion, which can result in a weak bond and risk of losing camera should connection fail. Attach mount in room temperature conditions. Mount’s ad…

20, 19 UsinG YoUr Hero3: caMera Modes PLAYBACK You can playback your GoPro Photos and Videos on a TV/HDTV or with the LCD Touch BacPac (optional accessory). Playback appears as a camera mode when camera is powered ON and plugged into a TV/HDTV. ▶See PLAYBACK for more information on viewing your…

42, 41 set UP ONE BUTTON MODE (continued) To exit One Button mode: 1. Power camera ON. 2. Press and hold until shows in the LCD window. 3. Press to enter. 4. Use to highlight OFF. 5. Press to select. 6. To exit, hold down for two seconds or cycle through to and press . PRO TIP…

48, 47 wireless controls WIRELESS CONTROLS CONTINUED On your Wi-Fi Remote: 1. Press to turn ON the GoPro Wi-Fi Remote. 2. While holding , press and release . 3. Once you see , you can release . 4. A check will appear once the Wi-Fi Remote and camera have successfu…

29, 28 caMera settinGs WIRELESS CONTROLS The HERO3 camera’s built-in Wi-Fi allows you to connect to the Wi-Fi Remote or smartphone/tablet via the GoPro App. When Wi-Fi is ON, your Wi-Fi Status Indicator Light will blink blue. To turn Wi-Fi ON/OFF: Press to turn Wi-Fi ON/OFF. The…

40, GoPro Hero 3 Black edition 3939 set UP DEFAULT MODE AT POWER UP You can set the camera’s Default mode of power up to any of the following modes: (factory default) 130.com.ua Autogood products «130» …