Nico Technology 3010PL Operation & User’s Manual

3, 3010PL Power Controller User’s Manual 3 Rev.1.0 Contents Contents ..........................................................................................................3 2 Product Information .................................................................................…

16, 3010PL Power Controller User’s Manual 16 Rev.1.0 nvoStatus SNVT_obj_status Status response nvoAlarm SNVT_alarm Alarm generating nvoFileDirectory SNVT_address Address of file for parameterization 6.2 Closed-Loop Actuator (CLA) Object Network Variables NV Name NV Type Comment nv…

1, 3010PL Power Controller User’s Manual 1 Rev.1.0 3010PL Power Controller Manual Revision 1.0 Nico Technology Ltd. 24F,No.37,SanMin Rd, 2.Sec, PanChiao City, Taipei County, Taiwan Phone +886-2-…

11, 3010PL Power Controller User’s Manual 11 Rev.1.0 Power Supply The 3010PL Power Controller has to be connected via connector 0 to 90~260VAC main voltage. Also see figure. 3.3. Figure 3.4 Connector pin for Power Supply 4.4 Wiring Diagram Figure 3.5 Connecting to 3010PL Power C…

21, 3010PL Power Controller User’s Manual 21 Rev.1.0 The One Shot option generates a pulse on the output network variable every time the input data changes from OFF to ON state. The pulse is generated after a delay specified on the Turn-On Delay. The duration of the pulse is specif…

5, Nico Technology 3010PL 3010PL Power Controller User’s Manual 5 Rev.1.0 3.1 Warnings Attention The device must be installed in compliance with the relevant DIN/VDE regulations or the relevant national standards. The connection to the supply voltage must be performed in accordance with VDE 0100 and VDE …