OHAUS CHAMP II BASE Manual, Operating And Installation Instructions

4, 4 CHAMP II BASE 1. Overview CHAMP II is a single load cell base. This scale base can be connected to CD-11, CD-31 or CD-33 Ohaus Industrial Indicator (or other types). 2. Physical Descriptions Construction Platform - Fabricated stainless steel Scale Frame - Formed and welded mild steel, painted…

3, 3 NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS. FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRON…

8, OHAUS CHAMP II BASE 8 Shift Test A shift test verifies that all sections of the scale platform weigh within tolerance. If the scale does not pass the shift test, verify the overload stop gaps before replacing the load cell. No adjustment for the shift is possible. If the shift test cannot be passed, the load cell must…

2, 2 Ohaus Corporation, 19A Chapin Road, P.O. Box 2033, Pine Brook, NJ, 07058, USA Declaration of Conformity We, Ohaus Corporation, declare under our sole responsibility that the instrument models listed below marked with “CE” - are in conformity with the directives and standards mentioned. Konfo…

5, 5 3. Installation Procedures Examine the shipping box for any signs of damage. If DAMAGE is found, make a claim with the carrier immediately. Open the box and remove the unit. Place the unit on a stable flat surface. Connect to the indicator. Level the scale, apply power and weigh. Good Wro…