Nissan 2002 Maxima Service Manual

70, Motor Relay or Motor =NFBR0117 DIAGNOSTIC PROCEDURE NFBR0117S01 1 INSPECTION START ABS motor relay inspection SBR990E SBR941E © GO TO 2. TROUBLE DIAGNOSES FOR SELF-DIAGNOSTIC ITEMS ABS Motor Relay or Motor BR-70 …

99, SBR905E ACTIVE TEST PROCEDURE NFBR0152S04 I When conducting Active test, vehicle must be stationary. I When ABS warning lamp or SLIP indicator lamp stays on, never conduct Active test. 1. Turn ignition switch OFF. 2. Connect CONSULT-II to Data Link Connector. 3. Start engine. 4. Touch “START”…

127, 5. Pedal Vibration and Noise =NFBR0192 1 INSPECTION START Pedal vibration and noise inspection SAT797A © GO TO 2. 2 CHECK SYMPTOM 1. Apply brake. 2. Start engine. Does the symptom appear only when engine is started? Yes © Carry out self-diagnosis. Refer to BR-96. No © GO TO 3. 3 RECH…

20, Nissan 2002 Maxima SBR002A SBR365AA On-vehicle Service NFBR0023 OPERATING CHECK NFBR0023S01 1. Stop engine and depress brake pedal several times. Check that pedal stroke does not change. 2. Depress brake pedal, then start engine. If pedal goes down slightly, operation is normal. AIRTIGHT CHECK NFBR00…

111, 4 CHECK WHEEL SENSOR Check signal from sensors by “Simple oscilloscope” function of CONSULT-II (Scale: 0.2 V/Div, 20 ms/Div) SBR051F Does the wave appear on screen when wheel is rotated? Yes © Repair harness and connectors between control unit connector and wheel sensor con- nector…

40, System Components NFBR0103 SBR644EA SBR124BA System Description NFBR0104 SENSOR NFBR0104S01 For M/T models: The sensor unit consists of a gear-shaped sensor rotor and a sen- sor element. The element contains a bar magnet around which a coil is wound. The sensor is installed on the back side of the…