Busch & Mueller E-werk Instruction Manual

1, Busch & Mueller E-werk E-WERK Bike-mobile hub dynamo powered supply unit for electronic devices Instruction manual. Please study carefully before using E-WERK! Capable of powering small electronic devices – e.g. mobile phone, MP3 player, GPS (also 12 V models for cars) – or of charging batteries �…

2, Shimano hub dynamo: Twist together one bared cable end each of the connection cable and the headlight cable. Insert twisted “cable pairs” into each of the apertures of the the Shimano plug’s inner part (picture 1). Please mind the polarity of the headlight, the E-WERK has no set polarity. …

3, Operation Caution: Before connecting a device, always adjust voltage and current according to the device’s needs. Adjusting with control dials on the E-WERK. Use the special plastic pen (remove from the bottom side of the E- WERK, hexagonal pen 2.5 mm). When reinserting into the b…

4, a. If the device automatically switches to the external power source upon connecting the E-WERK, the built in battery is neither used nor charged. (If the battery shall be charged after all, connect the E-WERK directly to the battery contacts - if possible.) b. If the connected dev…

5, system drops up to 50%. For other lighting systems, no statements can be made. Simultaneous operation diminishes the output accordingly. Please note: Depending on national law, you may not be allowed to use the E-WERK and the lighting system at the same time after dark. Technical details Ref. no.…