Grant 140/160 Manual, User, Installation And Servicing Instructions

24, 24 Multi Pass Oil Boilers 3.12.3 Sealed system - (See Fig. 16) Grant sealed system kits and sealed system boilers, incorporating factory fitted systems and circulating pumps are available. 1 The boiler is only suitable for use with a sealed system complying with the requirements of BS 5449. The max…

30, 30 Multi Pass Oil Boilers EOGB Sterling 90 burner - see Fig. 22 1 Position the burner gasket over the base of the combustion head and insert the burner mounting bolt so that it passes through the burner lug. Mount the burner assembly so that the combustion head is inside the combustion chamber. …

38, Grant 140/160 38 Multi Pass Oil Boilers 7 - BOILER SERVICING Fig. 28 - EOGB Sterling 90 burner head/electrode settings 36 mm 0.0 to 2.0mm 1.7 to 3.7mm 9.5 to 11.5mm IMPORTANT: The electrode settings given MUST be observed Fig. 29 EOGB Sterling burner Main burner assembly Front assembly Measured f…

5, 5 Multi Pass Oil Boilers 5 Ventilation - Always ensure that the boiler has adequate ventilation. Any ventilation openings provided by the Installer must not be obstructed. Periodically check that they are clear. Do not attempt to 'box in' the boiler or build a compartment around…

11, 11 Multi Pass Oil Boilers The boiler casing door is factory fitted with the hinges on the left hand side. If required, the door may be hinged on the right hand side as follows:- Remove the hinge pin from the top of the door and the bottom hinge bracket. Refit them to the other side of the …

9, 9 Multi Pass Oil Boilers 70/90 90/140 140/160 160/200 50/70 70/90 140/160 160/200 Fig. 1 Boiler House models 1080 410 410 690 120 125 170 200 499 650 160 180 36 54 ABCDEFGH Model (Kitchen) Dimension (mm) 860 605 ABC EFG Model (Boiler House) Dimension (mm) 720 895 460 460 445 480 625 655 D H 6…