GRAPHTEC CS1000 Service Manual

25, CS1000-UM-251-03-9370 3-8 3. PREPARING TO OPERATE THE SCANNER 3.6 Attaching the Document Support Wires The document support wires should be attached to the CS1000EV when scanning carrier sheets or heavy documents. CS1000/1000EV Document support wires The document support wires should…

96, CS1000-UM-251-03-9370 9-5 9. BOARDS AND ELECTRICAL COMPONENTS 9.2 Power Supply Unit 1. Checking Voltage Levels (1) Turn off the power for the scanner unit. (2) Detach the connector (CN2) from the power board before checking voltage levels. (3) Turn on the power for the scanner unit and …

3, GRAPHTEC CS1000 CS1000-UM-251-9370 2 HISTORY OF REVISIONS No. Date issued Description of revision Page Edition 1 01.11.12 First Printing All 01 2 02.07.25 8.10 Revised due to changed power supply unit in- stallation positions 8-12 02 8.11 CIS Board (A/B) - Erro…

33, CS1000-UM-251-01-9370 4-5 4. OPERATION AND CONNECTION For Windows 2000 (1) After connecting the CS1000 to the computer, turn on the CS1000 and then turn on the computer. (2) When Windows 2000 boots, the message below appears. (3) Next, the Found New Hardware Wizard appears. (4) Click the…

115, CS1000-UM-251-02-9370 10-13 10. ADJUSTMENTS WITH SOFTWARE 4. Shading (undesired color line removal) • This adjustment removes white or color undesired lines caused by dirt after performing shading (white correction). • Set DIP switch 2 on the scanner to "ON". • Prepare two unde…

99, CS1000-UM-251-03-9370 9-8 9. BOARDS AND ELECTRICAL COMPONENTS 9.4 At-a-glance Guide to Adjustment Functions Press one of the keys shown below at power-on to select the corresponding mode. Key operations Set DIP switch 2 to the ON position and press one of the keys shown below at power-on to select …