Tainet WANpro 2000 Operation & User’s Manual

53, Configure and Monitor Via PCs or Terminals 4-23 4.4.8 Filter IP filters are a security feature that allow you to: • Keep unauthorized people from accessing your LAN resources. • Restrict traffic on the WAN link. You can use IP filter to restrict the types of Internet traffic that …

54, Configure and Monitor Via PCs or Terminals 4-24 c. After login to “Filter” item, select “Incoming filter” Filter_Config MENU TAINET WANpro 2000 -------------------------------------------------------------------------------- [Incoming_Filter] Outgoing_Filter Incoming Filter Co…

13, QUICK START 1-3 User’s optional interface modules are depending on their applied network interface. The optional modules of the WAN interface (see Figure 1.1B) might include V.24, V.35 RS-530 and X.21. The Console port is used to monitor and operate the device via PCs or Terminals. User s…

64, Configure and Monitor Via PCs or Terminals 4-34 The following describes the details of the status items when the WAN protocol is selected Frame Relay. Monitoring MENU TAINET WANpro 2000 ------------------------------------------------------------------------------------------ Current…

57, Configure and Monitor Via PCs or Terminals 4-27 The following describes the details of the setup items. Default Lease Time: This option specifies the IP address lease time for clients. It is a time in seconds and the default value is 86400 (1 day). Gateway: This option specifies the IP …

78, Tainet WANpro 2000 Glossary G-2 E1 A wideband digital interface operating at 2.048Mbps, defined by ITU recommendations G.703 and G.704. It is used primarily outside North America. Factory Profile There are a group of the preset values that defined by the manufacturer. It is easy to be setup by the us…